BJNPT - PEEL-COAT TYPE III,PLASTIC COATING (SUP DA)
- MSDS: BJNPT
- Manufacturer: EVANS MANUFACTURING INC
- Product Name: PEEL-COAT TYPE III,PLASTIC COATING (SUP DA)
- National Stock Number: 8030-01-117-8019
Product Identification
Product ID:PEEL-COAT TYPE III,PLASTIC COATING (SUP DA)
MSDS Date:02/24/1989
FSC:8030
NIIN:01-117-8019
MSDS Number: BJNPT
Responsible Party
WARREN, MI 48091
US
Emergency Phone: 313-755-1050
Info Phone: 313-755-1050
Preparer: FRANKLIN B EVANS
Cage: EVANS
Contractor
Telephone: 313-583-9890
Cage: 56307
Ingredients
NONHAZARDOUS INGREDIENT
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN/INGESTION/INHALATION:NONE.
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:EYES:N/K .SKIN:APPLIED AT 350F,176.67C IF IT COMES IN CONTACT
WITH THE SKIN,TREAT AS AN OIL BURN.INGESTION/INHALATION:N/K .
Fire Fighting
Flash Point Method:OC
Flash Point:>400F,>204C
Extinguishing Media:CARBON DIOXIDE.
Fire Fighting Procedures:TREAT AS OIL FIRE.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:NOT APPLICABLE-SOLID.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:NONE
Other Precautions:N/K
Exposure Controls
Respiratory Protection:NONE
Ventilation:NOT NEEDED.CONSULT LOCAL SAFETY/HEALTH AUTHORITIES IF
ADDITIONAL GUIDANCE IS NEEDED .
Protective Gloves:WHILE DIPPING.
Eye Protection:NONE
Other Protective Equipment:NONE
Work Hygienic Practices:N/K
Supplemental Safety and Health
PART NO:COMPOUND,P-10.WASTE DISP METH:SAME AS WAX OR OIL-INCINERATION
OR LAND FILL.ROUTES OF ENTRY:INHALATION/SKIN/INGESTION .
Chemical Properties
Boiling Pt:B.P. Text:>700F,>371C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Spec Gravity:1 (WATER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:100% SOLID THERMOPLASTIC,WAX-LIKE WITH VERY LITTLE
ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE,ONLY CARBON.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS.COORDINATION WITH SUPPORTING
INSTALLATION AND/OR MACOM ENVIRONMENTAL COORDINATION PRIOR TO
DISPOSAL IS RECOMMENDED TO DETERMINE APPROPRIATE DISPOSAL METHODS
.(SEE SUPP)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.